Trigonometry
Trig Calculator: Sin, Cos, Tan And Inverse Trig With Steps
Last updated: November 2026
Find the sine, cosine and tangent of any angle, work back from a ratio to the angle, or convert between degrees and radians. For angles like 30°, 45° and 60° the calculator also shows the exact value, such as √3/2.
- Degrees or radians
- Exact values for special angles
- Runs on your device
How To Use The Trig Calculator
The calculator has three tabs. Each one updates as you type.
- Sin, Cos, Tan: enter an angle and choose degrees or radians. You get all six trig values, the angle in both units, and its quadrant. For multiples of 30° and 45° you also get the exact form.
- Find the Angle: choose sin⁻¹, cos⁻¹ or tan⁻¹ and enter a ratio. You get the angle in degrees and radians, plus a note on the other angles that share the same value.
- Degrees and Radians: convert an angle either way. Whole-degree answers are also shown as a multiple of π, such as 3π/2.
What Sine, Cosine And Tangent Mean
In a right triangle, each trig function is a ratio of two sides, measured from one of the acute angles. The memory aid is SOH CAH TOA.
| Function | Ratio | Memory aid |
|---|---|---|
| sin θ | opposite ÷ hypotenuse | SOH |
| cos θ | adjacent ÷ hypotenuse | CAH |
| tan θ | opposite ÷ adjacent | TOA |
Take a 3-4-5 right triangle. For the angle opposite the side of length 3, sin θ = 3/5 = 0.6, cos θ = 4/5 = 0.8 and tan θ = 3/4 = 0.75. The sides themselves come from the Pythagorean theorem calculator, since 3² + 4² = 5².
For angles bigger than 90°, the triangle definition stops working, and the unit circle takes over: cos θ and sin θ are the x and y coordinates of the point at angle θ on a circle of radius 1.
Exact Values For Special Angles
These five angles appear in almost every trig class. Their values come from the 45-45-90 and 30-60-90 triangles.
| Angle | Radians | sin | cos | tan |
|---|---|---|---|---|
| 0° | 0 | 0 | 1 | 0 |
| 30° | π/6 | 1/2 | √3/2 | √3/3 |
| 45° | π/4 | √2/2 | √2/2 | 1 |
| 60° | π/3 | √3/2 | 1/2 | √3 |
| 90° | π/2 | 1 | 0 | undefined |
tan 90° is undefined because cos 90° = 0, and tangent is sine divided by cosine. The calculator says “undefined” instead of showing a huge rounding error.
Degrees Vs Radians
A full turn is 360°, or 2π radians. One radian is the angle that cuts off an arc as long as the radius, about 57.2958°.
Using the wrong mode is the most common trig error. In degree mode, sin(30) = 0.5. In radian mode the same keys give sin(30) ≈ −0.988032, because the calculator reads 30 as 30 radians. If an answer looks wrong, check the mode first. The scientific calculator guide shows where the DEG/RAD setting is on common models.
Finding An Angle With Inverse Trig
Inverse trig runs the other way: you know a ratio and want the angle. In the 3-4-5 triangle, tan⁻¹(0.75) = 36.87°, and sin⁻¹(0.6) gives the same 36.87°.
Each inverse function returns one angle from a fixed range, even though many angles share the same value:
- sin⁻¹ returns −90° to 90°. sin 30° = sin 150° = 0.5, but sin⁻¹(0.5) returns 30°.
- cos⁻¹ returns 0° to 180°.
- tan⁻¹ returns −90° to 90°. Add 180° for the other angle with the same tangent.
Sine and cosine never go above 1 or below −1, so sin⁻¹(2) has no answer. The calculator tells you so instead of returning an error code. When a triangle problem has two possible angles, the triangle calculator checks both.
Signs In Each Quadrant
The sign of each function depends on where the angle lands on the unit circle.
| Quadrant | Angles | Positive |
|---|---|---|
| I | 0° to 90° | sin, cos, tan |
| II | 90° to 180° | sin only |
| III | 180° to 270° | tan only |
| IV | 270° to 360° | cos only |
A common way to remember it, going counterclockwise from quadrant I: All Students Take Calculus.
Cosecant, Secant And Cotangent
The other three functions are reciprocals: csc θ = 1 ÷ sin θ, sec θ = 1 ÷ cos θ and cot θ = 1 ÷ tan θ. Most handheld calculators have no keys for them, so you divide by hand. This calculator lists all three under the main result. Each one is undefined where the function it divides by is 0.
Worked Examples
How High Does A Ladder Reach?
- Problem
- A 5 m ladder leans against a wall at 70° to the ground.
- Method
- The wall height is opposite the angle, and the ladder is the hypotenuse, so use sine: 5 × sin 70°.
- Result
- 4.698 m up the wall. The foot of the ladder is 5 × cos 70° ≈ 1.71 m from the wall.
The Angle Of A Ramp
- Problem
- A ramp rises 1 unit for every 12 units of run.
- Method
- Rise is opposite and run is adjacent, so use tan⁻¹(1 ÷ 12).
- Result
- 4.76°. The slope calculator gives the same line as a percent grade, 8.33%.
Height Of A Tree From Its Shadow
- Problem
- You stand 20 m from a tree and measure 35° up to the top.
- Method
- Height is opposite, distance is adjacent: 20 × tan 35°.
- Result
- 14.0 m, plus your eye height above the ground.
Common Trig Mistakes
- Wrong angle mode. Degrees and radians give completely different answers. Match the mode to the units in the problem.
- Reading sin⁻¹ as 1 ÷ sin. sin⁻¹(x) is the inverse function, the angle. 1 ÷ sin x is csc x.
- Using the wrong side. “Opposite” and “adjacent” depend on which angle you measure from. Label the sides from that angle first.
- Trusting the single inverse answer. sin⁻¹ and cos⁻¹ return one angle, but a triangle can have two that fit.
- Rounding too early. Keep full decimals until the last step, then round the final answer.
Try it with your own numbers
The calculator at the top of this page uses the same formulas as the examples.
Frequently Asked Questions
How do I calculate sin, cos and tan?
Enter the angle in the Sin, Cos, Tan tab and choose degrees or radians. By hand, use SOH CAH TOA on a right triangle: sine is opposite over hypotenuse, cosine is adjacent over hypotenuse, and tangent is opposite over adjacent.
Why is tan 90° undefined?
Tangent is sine divided by cosine, and cos 90° = 0. Division by zero has no value, so tan 90° and tan 270° are undefined.
How do I convert radians to degrees?
Multiply by 180 and divide by π. For example, π/3 radians × 180 ÷ π = 60°. The Degrees and Radians tab does this both ways.
What is the difference between sin⁻¹ and csc?
sin⁻¹(x), also written arcsin, returns an angle. csc x is 1 ÷ sin x, a ratio. They are not the same thing even though both use the word “inverse” informally.
Why does my calculator give a different answer?
It is almost always the angle mode. Check whether your calculator shows DEG or RAD, and set it to match the problem.